X-band pulsed EPR¶
Atomize is used to control X-band pulsed EPR spectrometer located in Novosibirsk Institute of Organic Chemistry. Since modern pulsed EPR spectrometers are rather complex multifunctional devices, the standard Atomize UI was extended into a user-friendly control center with special features. The control center includes:
- a simple UI for the digitizer, oscilloscope, temperature controller, and mw bridge
- presets for standard pulse experiments, such as Hahn echo, inversion recovery, three pulse ESEEM, etc.
- interactive pulse tables for the two microwave channels (rectangular pulses, shaped pulses)
- a UI for post-processing experimental data
The pulse tables incorporate phase cycling of the pulses, which is a great aid for precise tuning of a pulse experiment. Rapid phase cycling enables on-the-fly Fourier transform (FT) of the data which is used extensively to set up acquisitions and monitor the progress of long experiments. The C and C++ backend of the ADC and pulse programmer supports fast updates of experimental data plots or their FTs at refresh rates as high as 100 Hz. The pulse generator module supports non-uniform sampling, which significantly improves time efficiency for many pulse experiments.
Hardware¶
| Component | Model |
|---|---|
| Digitizer | Spectrum M4i-4450-x8 PCIe |
| DAC | Spectrum M4i.6631-x8 PCIe |
| Pulse generator | PulseBlaster ESR-PRO-500 PCI |
| Magnetic field controller | BH15 |
| Oscilloscope | Keysight DSOX3034A |
| Temperature controller | Stanford Research PTC10 |
| Microwave bridge | Micran X-band |
Publication¶
Isaev N.P., Melnikov A.R., Lomanovich K.A., Dugin M.V., Ivanov M.Y., Polovyanenko D.N., Veber S.L., Bowman M.K., Bagryanskaya E.G. A broadband pulse EPR spectrometer for high-throughput measurements in the X-band. J. Magn. Res. Open, 2022, 14-15, Art. № 100092. DOI: https://doi.org/10.1016/j.jmro.2022.100092